Aluminum Frame Swing-Up Rest Bench Bench shall be constructed of 3/4” thick high density polyethylene with a textured surface. The front edge of the bench shall be capped by a 1-1/2” x 1” x 1/8” 6063-T52 aluminum angle. Vertical front debris guard constructed from 1” grid polyethylene structural foam 7/16” thick is connected to the bottom of the bench by means of a full length 1-1/2” x 1” x 1/8” 6063-T52 aluminum angle. Bench shall be designed to pivot up and remain in the upright position until it is manually released and lowered. Bench shall be provided with all necessary hardware for installation. close window