Chainlink Isolation Panels

All exterior framework shall be made from Gatorshield® ASTM A500 structural grade steel tubing, 1.050” pipe size O.D. (refer to Chainlink Framework specifications).

Upper chainlink portion of isolation panel shall be uniform (2”, 1-1/2” or 1”) mesh in either (#9, #11, or #13) gauge Smooth Seal wire (refer to Chainlink Fabric and Mesh specifications).

Upper chainlink and bottom solid portions shall be separated by horizontal brace made from (1.050” or .815”) O.D. tubing.

Bottom portion of isolation panel shall be 48” high (other heights available), shall be installed with 3/4” wide keyhole clamps spaced on 8” center and shall be one of the following materials (specify #1, #2, or #3):

1. Stainless steel sheets of #24 gauge (18-8 type 304-2B) shall be installed with #22 gauge stainless steel keyhole clips and spot welded.

2. Galvanized steel sheets of #24 gauge shall be installed with #22 gauge stainless steel keyhole clips and spot welded.

3. ABS Sheet (Acrylonitrile Batadiene Styrene) 1/8” thick shall be installed with aluminum keyhole and stainlesssteel bolts. Recommended for indoor use only.

Isolation channel shall be extruded 6063-T5 aluminum. Two panel hangers shall be provided for channels up to 10’ long. Three panel hangers are used for panels over 10’ long. Channels shall be secured and sealed to the floor with provided sealant

close window