UltraBase™ Base unit shall be constructed of molded, solid surface Lite-Gran® fiberglass-reinforced plastic with a 1/2” thick honeycomb core in the main floor area. The base unit shall contain a 2” PVC drain with removable snap-in hair guard. 3/4” plywood pads covered by fiberglass-reinforced plastic shall be molded into each corner of the underside of the base unit. UltraBase legs shall be Super Gatorshield™ ASTM A500 structural steel tubing, threaded at one end and having a threaded insert at the opposite end. Four stainless steel bolts with lock nuts and adjustable floor pads shall be provided for insertion into each threaded insert to provide a means for leveling the base units. Units shall have molded ledges on each side to provide a secure mounting position for (optional) resting bench. Optional resting bench shall consist of 1” grid polyethylene structural foam 7/16” thick with a full-length 2” x 2” x 1/8” 6061-T6 aluminum angle covering the front side, and 1-1/2” x 1-1/2” x 1/8” 6061-T6 angle stiffeners along the underside that also permit the mounting of a front debris guard constructed from 1” grid polyethylene structural foam. close window